Ksq31 Ith in-The-Hole Longhole Drill Rig Wheel Type Available

• After-sales Service: Engineers at Spots All Over The World
• Warranty: 1 Y After Operating or 12+1.5 M After Delivery
• Certification: CE, RoHS, ISO 9001:2000, ISO 9001:2008
• Condition: New
• Motor: AC Motor
• Drill Hole Diameter: <100mm
• Model NO.: KSQ31
• Drill Hole Depth: <100m
• Bit Type: Diamond Bit
• Drilling Way: Compound
• Transport Package: Container
• Origin: China
• HS Code: 84303900
• Production Capacity: 5000 Sets / Month

Product Description

KSQ31 ITH in-the-hole longhole drill rig Wheel Type available
 

KSQ31 is a highly versatile and compact ITH in-the-hole longhole ring drill rig,designed for underground mining in 3.2 x 3.2 m medium or larger sized production drifts.This long-hole drilling rig is capable of drilling vertical,inclined fans,single and / or parallel ∅89-216 mm holes up to 100 meters in length using 3"to 8"ITH hammers,and 76 - 127 mm drill pipes in mechanized and automated underground mining operations.(For mechanized reaming slot raises,please contact us.)

Quick facts
» Hole diameter: 89-216 mm, Hole depth: 80 - 100 m (Hole diamete more than 150 mm , and / or hole depth more than 100m,please contact us),
» Cross sectional area: 4900 x 7900mm(parallel hole width 3050mm,360 degrees ring drilling),
» Engine power: 53kw/2200rpm Deut,
» Motor power:55 kw ABB.

 

Features
- This drill is designed for high mobility in underground mines with ramp / raise access,
- It can be used to drill from 3 5/8″(92 mm) to 6″(150 mm) diameter holes to a depth greater than 330'(100 m) down hole. Others like for rapid raising acceptable,
- Safe roof, ROPS and FOPS cabin or canopy optional,
- Self-contained / on-board booster /compressor optional,
- Remote control optional.

Technical Specifications(Against ITH in-the-hole longhole drill rig blasting hole depth 30m with hole diameter 90-150mm)
 

Top Drive		Drilling Control System
Type	SMDTHH6000	Anti-jamming control	Yes
Working pressure	Up to 210 bar(rotation)	Rotation control	Adjustable/Reversible
Torque	Max. 5800 Nm	Flushing control	Air flow and pressure
Rotation speed	0- 60 rpm	Percussion control	Adjustable power
Weight	340 kg	Control panel	Grouped onboard panel
Length with saver sub	760 mm	Carrier
Position System		Type of carrier	Tracked carrier
Rotary Acurator	360° ring drilling	Tracks	triple grouser, sealed and lubricated
Sliding table	1.5 m feed parallel positioning	Width	305 mm / 12 in
Pendulum arm	1.5 m feed parallel positioning in the side walls.	Engine - Deut	BF4L2011 53kW
	1.5 m feed parallel positioning upwards/downwards	Transmission Hydrodynamic	Double-speed motor
Feed dump	+20 Degrees forward	Tramming speed	Max.2.5 km/h
Feed drilling	-65 Degrees backward	High gear	Max.2.5 km/h
Drill pipe	4' pipe	Low gear	1.2 km/h
Hydraulic System		Stinger	4 extendable
Powerpack	1 x 45 kW	Oscillation angles	+/- 6°
Percussion pump	100 cc (variable)	Gradeability / sideways tilt	Max. 25° / 5°
Rotation pump	55 cc (gear)	Ground clearance	355 mm
Filtration	10 µ	Centralized greasing points	10 ports
Oil tank volume	270 liters	Air and water System
Cooler for hydraulic oil	Oil-to-air 1 x 45 kW	Flushing	By air
Electric System		Air capacity	20 m3/min
Standard voltages	380 -690 V(± 10%), 50 or 60 Hz	Air pressure	2.5 Mpa / 25 bar
Total installed power	60 kW	Water booster pump	30 l/min at 45 bar
Batteries(Chargeable)	2 x 12 V, 80 Ah	Hammer lubrication system	DTHHLu60 with oil level sensor
Cable Reel	80m-100m	Overall with 4' pipes,others depending on options.
Cable reel lubrication	Manual	Weight	10000 kg
Cable reel mud clean	Manual	Transport / bolting length	6165 mm / 5530 mm
Front lights	6 x 50W LED (4200 lm, 6000 K)	Tramming / bolting width	2370 mm
Rear lights	4 x 50W LED (4200 lm, 6000 K)	Tramming / drilling height	2550 mm / 2720 mm
Percussion hour meters	Optional	Turning width(T-section)	2800 mm
Operator remote control	Optional	Turning radius(Inner/Outter)	R2890 / R5440 mm

Below dimensions in mm,and against drilling rods length 1525mm..
Tailor-made specifications,like cabin with air conditioner and joy sticks on seat sides, accepted.


Below machines could be matched with this production drill rig,