Inclined Drifts Development Drill Rig Kj310 with Electro-Hydraulic Hc109 Drifter

• After-sales Service: Engineers at Spots All Over The World
• Warranty: 1 Y After Operating or 12+1.5 M After Delivery
• Certification: CE, RoHS, ISO 9001:2000, ISO 9001:2008
• Condition: New
• Motor: AC Motor
• Drill Hole Diameter: <100mm
• Model NO.: KJ310
• Drill Hole Depth: <100m
• Bit Type: Diamond Bit
• Drilling Way: Impactor
• Transport Package: Container
• Trademark: SMME
• Origin: China
• HS Code: 84303900
• Production Capacity: 5000 Sets / Month

Product Description

Inclined drifts development drill rig KJ310 electro-hydraulic powered with HC109 drifter 

Split Mountain KJ310,is a track mounted,electro-hydraulic mining development drill rig,designed for inclined drifts drilling on slope with gradeability near 25 degrees. With fast and accurate drilling, this mining drill rig lowers waste development costs and minimizes dilution while offering a safe and ergonomic workplace for both operators and service personnel. Combination of efficient rock drill, robust boom and advanced controls, the mining drill rig will meet even the most challenging requirements.

Quick Facts
» Drifter / rock drill: HC109 18.8 kW,
» Feed 360-degree rollover and ±135° Swing,ideal for cross cutting and bolting,
» Hole diameter: 45-88 mm with HC109 Rock Drill/Drifter,
» Coverage: 12-35 m2,
» Engine power: 60kw/2200rpm Cummin,
» Motor power:55 kw ABB.

Features
- Robust universal,Heavy duty boom with a large optimum shaped coverage,
- Full automatic parallelism for direct,fast,easy accurate positioning,face drilling,cross cutting and bolting,
- High performance with reliable hydraulic control system,ergonomically designed operator environment,good visibility and hand reach servicability on the panel,
- Powerful engine,low oil consumption,
- ROPS and FOPS approved canopy or cabin.

Technical Specifications

Hydraulic Drifter/Rock Drill		Control System
Type	HC109	Anti-jamming control	Yes
Percussion power	18.8kW	Rotation control	Adjustable/Reversible
Percussion pressure	Max. 135 bar	Flushing control	Water flow and pressure
Percussion rate	47Hz	Percussion control	Adjustable power
Rotation torque	780 Nm	Voltage	24V
Hole size (bolting)	∅42-102 mm	Carrier
Shank adapter	T45 / R38 male	Type of carrier	Track / Crawler
Boom		Tracks	triple grouser, sealed and lubricated
Parallel holding	Complete	Width	305 mm / 12 in
Lifting angle	Up55°,down 16°	Cummin engine QSB-C80-31	60 kW,Tier 3
Swing	left 35°,right 35°	Transmission	Double-speed motor
Extension	1600 mm	Tramming speed	Max.2.5 km/h
Feed extension	1200 mm	High gear	Max.2.5 km/h
Feed roll-over angle	360° Rotaty Actuator	Low gear	1.2 km/h
Hydraulic System		Hydraulic jacks, front	2 extendable
Powerpack	1 x 55 kW	Oscillation angles	+/- 10°
Percussion pump	100 cc (variable)	Gradeability / sideways tilt	Max. 25° / 5°
Rotation pump	55 cc (gear)	Ground clearance	180 mm
Filtration	10 µ	Centralized greasing points	8 ports
Oil tank volume	200 liters	Air And Water System
Cooler for hydraulic oil	Oil-to-water 1 x 30 kW	Flushing	By water
Electric System		Water pump capacity	50 l/min
Standard voltages	380 - 690 V (± 10%), 50 or 60 Hz	Rock drill oil consumption	180 - 250 g/h
Total installed power	70 kW	Rock drill air consumption	300 l/min
Batteries(Chargeable)	2 x 12 V, 80 Ah	Air compressor	0.5 m³/min (7 bar)
Cable Reel	80m-100m	Overall with rods 3m,others depending on options.
Cable reel lubrication	Manual	Weight	12000 kg
Cable reel mud clean	Manual	Transport length	10700 mm
Front lights	6 x 50W LED (4200 lm, 6000 K)	Tramming / drilling width	1650 mm / 2300 mm
Rear lights	4 x 50W LED (4200 lm, 6000 K)	Tramming / drilling height	1880 mm / 2480 mm
Percussion hour meters	Optional	Turning width(T-section)	2800 mm
Operator remote control	Optional	Turning radius(Inner/Outter)	R3263 / R5400 mm

Below matched machines suggested,


Any more question, please feel free to contact us.