| After-sales Service: | Engineers on Spots All Over The World |
|---|---|
| Warranty: | 1 Year After Operation or 12+1 Month After Deliver |
| Type: | Crawler Excavator |
|
Still deciding? Get samples of US$ 90000/Piece
Request Sample
|
Suppliers with verified business licenses
| Operating weight | 15 600 kg |
| Standard bucket capacity | 0,61 m³ |
| Shipping length | 7 825 mm |
| Shipping width | 2 600 mm |
| Height over cabin | 2 825 mm |
| Model | Cummins QSF3. 8 |
| Emission rating | EU Stage V |
| Displacement | 3.8 L |
| Rated power output | 93 kW |
| Type | 2 variable piston pumps |
| Displacement | 2×126.4 L/min |
| Hydraulic pressure | 31.4/34.3 Mpa |
| Max. digging depth | 5 525 mm |
| Max. digging reach | 8 370 mm |
| Max. bucket digging force | 100 kN |
| Max. arm digging force | 76 kN |
Achieving near zero emission levels, while delivering from 55 to 98 kW without compromising power, performance, or fuel economy, that's the challenge fully met by the compact and powerful Cummins QSF3.8 engine. This engine enjoys wide popularity in the market, and so it has an extensive service network. It's the engine Sunward required to power the SWE 155F - and the fact that it complies with the European Union's Stage V emission requirements goes without saying.
All key components in Sunward excavators are carefully selected, from Cummins engine to hydraulics. Hydraulics are often regarded as the heart of the machine. That's why Sunward sources exclusively from the highest references in the market. For the SWE 155F, we selected Japanese premium brands KPM for the hydraulic pump and swing motor and KYB to be our main supplier for the Main Control Valve (MCV). Both highly reliable brands are known for their high efficiency and long life components, designing them specifically to meet the demands of hydraulic excavators.
The SWE 155F has been designed with durability in mind. The Cummins engine has built a reputation for high durability, even in extreme working conditions. Also, special attention has been put into the key parts of the SWE 155F, such as the boom and the arm, which are designed with an increased sheet material thickness. All supporting elements are made of high strength, high ductility, and structural steel die forged pieces. This has the great advantage of providing elements with both high wear resistance and structural strength. This process delivers a massive increase in reliability operating under heavy duty work. For example, the swingarm and bucket rod are designed with the reliability standard of 20 000 hours.
Also, the SWE 155F's heavy-duty implements are delicately annealed, which completely eliminates the residue stress in weld seams and increases the machine's reliability significantly. After welding, the natural cooling process (with the risk of uneven cooling) is prevented by heating the metal in an isolated chamber to 600 - 800°C and then cooled down slowly (5 - 8 hours), avoiding residual stress and defects. This kind of cooling process is usually not adopted by manufacturers who want to save time and money.
Last but not least, the X chassis has been reinforced, bringing excellent resistance to distortion.
Thanks to the inline 4-cylinder Cummins QSF3.8 engine, the SWE 155F uses less fuel, with total fluid efficiency (includes both fuel and Diesel Exhaust Fluid) improved by up to 3 percent, with no compromise on performance (this engine has an even better performance compared to it previous version, delivering 10 percent more power and almost 20 percent more torque across the entire RPM range).
Sunward's SWE 155F medium excavator also has the highest hydraulic efficiency, which results in low fuel consumption. With the new premium quality main pump from KPM, and the innovative thinking from Sunward, we increased the machine's displacement by 7%, power by 4%, and volume efficiency by 6% - making the entire excavator more energy efficient).
Finally, thanks to the 3 attachment work modes, operators can enjoy versatility, but also fuel consumption optimization.
In the spirit of Sunward's motto - 'Innovation Leads to Value' - the design and engineering of the SWE 155F is focused on generating optimal value for the machine's owner while offering optimum versatility to the machine's operator. The SWE 155F can be used in a large variety of working conditions and applications. And thanks to the 3 separate auxiliary lines (2 of them are equipped with a shut-off valve for easy and oil leakage-free installation of attachments), the 3 bucket working modes, and the 3 attachment work modes, an operator needs only a few minutes to fully appreciate the possibilities offered.
This slightly Sunward SWE 90UF-2PB mini excavator has it all from the day it leaves the factory:
- Auto idle engine to save fuel and limit the engine's consumption. - While other manufacturers usually use a flow throttle (because it's cheaper), we at Sunward opt for a Load Sensing (hydraulic) system, which provides better energy saving possibilities.
- Safety valves for the boom cylinder for safer operations.
- Auto-shifting traveling motor for smooth operations to the operator.
- TOPS, FOPS & ROPS cab.
- Battery cut-off switch for safer operations and prolonged battery lifetime and power - which is especially appreciated in the cold weather of Scandinavian countries.
- Double Acting Hydraulic Circuit
- Factory-fitted Hydraulic Quick Hitch Lines
- Factory-fitted Hammer & Rotation Line
- Factory-fitted Case Drain Line
- Factory-fitted Dual Proportional Joysticks
- Factory-fitted Tiltrotator Configured Joystick Controls (tiltrotator of your choice)
- 4 LED work lights as standard: 2 on the front of the cab, and 2 on both sides of the boom
To reduce maintenance time and cost, the covers at the rear and on the side open fully to provide direct access to the service points. With very easy access to the fuel tank and centralized grease fittings, the SWE 155F is as easy to maintain as it is to operate.
The high strength SWE 155F cab meets no less than FOPS, TOPS, and ROPS requirements, which are standard and among the first features to ensure a safe and comfortable job in all application environments. Despite its compact size from the outside, the SWE 155F offers easy access to the roomy cab, welcoming operators of all sizes from everywhere in Europe. Thanks to the large windows and the well organized cab, everything is designed to keep operators comfortable and productive as well as safe.
Sunward is your smartest investment in reliability, performance, and high ROI. Indeed, the SWE 155F's expert design includes a well-thought-out selection of components that streamline operation and maintenance. Our design choices result in a machine that provides so many standard features, premium-brand key components, and capabilities at the right price.
And furthermore, Sunward's own genuine spare parts are economical as well - and all of this best value for money is crowned by up to 5 years of warranty, standard for all Sunward products.
| DRIVELINE | |
| Emission Rating | Tier 2 |
| Engine Manufacturer | Cummin |
| Number Of Cylinders | |
| Displacement, ltr (Inches³) | 6.7(409) |
| Rated speed, rpm | 2000 |
| Engine Output - Net, kW (hp) | 125(169) |
| Number Of Carrier Rollers - Each Side | 2 |
| Number Of Track Rollers - Each Side | 8 |
| Track Shoe Width, mm (inches) | 600(24) |
| DIMENSIONS | |
| Transport Length Mono Boom, mm (ft/in) | 9650(31 ft 6 in ) |
| Transport Height - Maximum, mm (ft/in) | 3370 (11 ft 1 in) |
| Overall Undercarriage Width, mm (ft/in) | 3390 (11 ft 1 in) |
| Track Length On Ground, mm (ft/in) | 3840 (12 ft 7 in) |
| Overall Undercarriage Length, mm (ft/in) | 4640 (15 ft 3 in) |
| Tailswing Radius, mm (ft/in) | 3140 (10 ft 4 in) |
| Ground Clearance, mm (inches) | 460 (18) |
| Width over fixed tracks, mm (ft/in) | 3390 (11 ft 1 in) |
| Track Gauge, mm (ft/in) | 2590 (8 ft 6 in) |
| Digging Reach - Mono Boom, mm (ft/in) | 10910 (35 ft 10 in) |
| Ground Level Reach - Mono Boom, mm (ft/in) | 10750 (35 ft 3 in) |
| Dig Height - Mono Boom, mm (ft/in) | 10560 (34 ft 8 in) |
| Dump Height - Mono Boom, mm (ft/in) | 7580 (24 ft 10 in) |
| Dig depth - 2.44m / 8'ft flat bottom, mm (ft/in) | 7440 (24 ft 5 in) |
| Dig Depth - Mono Boom, mm (ft/in) | 7610 (25 ft ) |
| Standard Arm, mm (ft/in) | 3610 (11 ft 10 in) |
| CAPACITIES | |
| Fuel Tank, ltr (gallons (US)) | 360(95) |
| Hydraulic Tank, ltr (gallons (US)) | |
| Number Of Batteries | 2 |
| Voltage, V | 24 |
| PERFORMANCE | |
| Ground Bearing Pressure, kPa (PSI) | 39.1 (5.66) |
| Swing Speed, rpm | 12 |
| Swing Torque, kNm (lbf / ft) | 77.5 (57150) |
| Travel Speed - High, kph (mph) | 3.5-5.4 |
| Tractive Force, kN (lbf) | 210(47220) |
| Arm Tearout, kN (lbf) | 114 (25628) |
| Bucket Breakout, kN (lbf) | 150(33722) |
| Gradeability, % | 70 |
| End lift - 7.5m Reach, kg (lbs) | 6070 (13050) |
| Side lift - 7.5m Reach, kg (lbs) | 3760 (8070) |
| Total Flow, lt/min (gallons (US) / min) | 448 (118.4) |
| Bucket Pressure, bar (PSI) | 343 (4975) |
| Boost Pressure, bar (PSI) | 380 (5511) |
| WEIGHTS | |
| Operating Weight, kg (lbs) | 22000(48470) |
){kind=link}