Radial Jumbo in The Hole Longhole Drill Rig Ks311 Top Hammer Long Hole Production Drill Rig Automated Underground Production Drilling

• Bit Type: Diamond Bit
• Drill Hole Diameter: 100-150mm
• Drilling Depth: 30-50m
• Model NO.: KS311
• Drilling Way: Compound
• Running Gear: Tire
• Type: Mining Drill Rig, Tunneling Drill Rig
• Transport Package: Container
• Specification: Parallel coverage 3 m Longhole diameter 42 m
• Trademark: SMME
• Origin: China
• HS Code: 84303130
• Production Capacity: 500 Sets/Month

Product Description

Radial Jumbo In the hole longhole drill rig KS311 top hammer long hole production drill rig automated underground production drilling

Detailed Photos

 

Product Description

 

KS311 is an electro-hydraulic top hammer longhole drill rig,engineered for production and long-hole drilling in underground mines,supplying fast and accurate straight hole drilling with guide device. This versatile top hammer longhole drill rig,mounted on frame-steered and diesel powered carriers and equipped with Montabert rock drills HC95LQW,HC110,HC112,HC150,or HC200, powerful & accurate drilling modules,sturdy longhole booms and FOPS/ROPS certified operator stations for maximum performance, safety, reliability and total drilling economy.The 360°feed rotation and wide swing/tilt angles make this top hammer longhole drill rig suitable for most mining methods and various drilling applications,like vertical and inclined plane rings and fans, as well as parallel long production holes and long single holes with a diameter of 64 to 102 millimeters (2 ½ to 4 inches) and a depth of up to 40 meters (131 feet),improving safety and lowering your operating costs.
Also this top hammer longhole drill rig offers a good performance-to-cost ratio for 4x4-meter to 5x5-meter or larger production drifts.

Quick facts
» 360-degree ring drilling with Parallel Holes Upwards/downwards up to 3066 mm apart,
» Hole diameter: 64-152 mm with Montabert HC95LQW,HC110,HC112,HC150 or HC200 Rock Drill/Drifter,
» Hole depth: rated up to 38 m, longer ones, like 44m optional,
» Engine power: 93kw/2200rpm Cummins QSB3.9-C125,
» Motor power:75-90 kw ABB.

Features
- Vertical and inclined plane rings and fans drilling,
- Also for parallel long production holes,
- As well as for long single holes,
- 360 rotation in full parallel coverage area and wide tilt angle ranges forward and backwards make the boom suitable to various drilling applications,
- Operator's safety,FOPS-approved protective roof,panel mounted under canopy,an ergonomic working environment.Cabin optional,
- Front and Rear Mounted Stingers For Stable Set Up For Drilling,
- Excel for hard rock drilling and in tough working conditions.
 

Product Parameters

Technical Specifications( Against HC112 drifter)

Hydraulic Drifter/Rock Drill			Control System
Type	HC112		Anti-jamming control	Yes
Percussion power	26-30kW		Rotation control	Adjustable/Reversible
Percussion pressure	Max. 210 bar		Flushing control	Water flow and pressure
Percussion rate	Max. 46Hz		Percussion control	Adjustable power
Rotation torque	Max. 1680Nm		Voltage	24V
Hole size	∅76 mm	∅89 -127 mm	Carrier
Shank adapter	T45 M	T51 M,T60 M	Type of carrier	Frame-steered
Drill unit			Carrier articulation	± 40°
Rod carousel capacity	24 pcs		Rear axle oscillation	± 10°
Feed /Pull Force	31 kN		Engine - Cummins	93 kW,QSB3.9- C125
Feed extension	1200 mm		Transmission Hydrodynamic	DT20000
Feed dump	+20 Degrees forward		Front / Rear Axles	DANA 123 / 112
Feed drilling	-65 Degrees backward		Tires	12.00-20
Drill Rod	4'-6' Rods		Service brakes	Hydraulic wet disc
Hydraulic System			Parking and emergency brakes	SAHR fail safewet disc
Powerpack	1 x 90 kW		Tramming speed	Max.16 km/h
Oil tank filling pump	Electric		Gradeability / sideways tilt	Max. 15° / 5°
Low oil level indication	Low oil level switch		Ground clearance	320 mm
Filtration	20 µ/10 µ		Centralized greasing points	10 ports
Oil tank volume	270 liters		Air And Water System
Cooler for hydraulic oil	Oil-to-water 1 x 45 kW		Flushing	By water
Electric System			Water pump capacity	375 l/min
Standard voltages	380 - 690 V (± 10%), 50 or 60 Hz		Rock drill oil consumption	180 - 250 g/h
Total installed power	119 kW		Rock drill air consumption	300 l/min
Batteries(Chargeable)	2 x 12 V, 80 Ah		Air compressor	1 m³/min (7 bar)
Cable Reel	80m-100m		Overall with rods 1525mm,others depending on options.
Cable reel lubrication	Manual		Weight	22000 kg
Cable reel mud clean	Manual		Transport / bolting length	9669 mm / 8500 mm
Front lights	6 x 50W LED (4200 lm, 6000 K)		Tramming / bolting width	2200 mm / 3300 mm
Rear lights	4 x 50W LED (4200 lm, 6000 K)		Tramming / drilling height	3253 mm / 3591 mm
Percussion hour meters	Optional		Turning width(T-section)	3400 mm
Operator remote control	Optional		Turning radius(Inner/Outter)	R2890 / R5440 mm

 

 

Our Advantages

Underground mining machines, one stop supplying.




1. Rock bolting rigs / Rock support drill rigs

2, Normal Development Drill Rigs


3, Scalers

4, low profile jumbo drill rigs


5, Autonomous Development Jumbo Drill Rigs



6, LHD and Dump Trucks

7, BullDozer


8, Surface operation

Excavators


..........................................

Any more machine purchasing, please feel free to contact us.