35 tonne 37 metric ton large hydraulic tracked excavator 926F 930F 933F 933E 936E 933FHD 933FDM Trackhoe stability power fuel efficiency fast lifting digging
Product Description
Why choose between power and efficiency when you can have both? The all excavators let you do more, for less cost, and with less environmental impact, don't settle for anything less.
No matter what you do, these excavator let you trust yourself and them 100%.
Features of these excavators,
Toughness and duralbility
Designed to work harder,for longer
To build machines that can withstand the hardest conditions takes intelligent design, and attention to detail. We know that a machine is only as strong as its weakest point, so every weld, every joint, every component is scrutinized to ensure it passes our rigorous durability tests. Here's the proof.
Stronger Chassis
Our X-shaped undercarriage delivers optimal structural integrity and reduces stress and deflection by 10%.
Extra Protection
Deeper side beams provide higher impact resistance and make it quicker and easier to add additional impact plates if required.
Extra Vigilance
100% flaw detection ensures every weld is checked to meet our stringent standards.
Incresed Durability
Choose from our range of performance and durability enhancing extras such as our easy to fit demolition guards and heavy duty counter-weight.
Tougher Boom and Arm
Finite element analysis proves the load efficiency and toughness of our boom and arm, but we go further to reduce stress by 35%.
Power and Efficiency
Designed to move more,for less...
There's no need to compromise digging performance to get the highest fuel efficiency because the all New 922F gives you both. With greater torque and more power at lower engine speeds you get the power you want and the fuel efficiency you need.
More real power
With VGT technology, the 8.9L, six-cylinder Cummins engine delivers 5% extra torque compared to high torque at low engine speeds. VGT enables the engine to maximize its power output whilst creating less noise and using less fuel.
Save every drop of fule
Engine Auto Idle and Auto Shutdown make every single drop of fuel count. Reducing unproductive fuel saves you money and helps protect the environment.
Eeceed your expectations
When it comes to efficiency, these excavators are smarter than you'd think. Feed Forward control technology matches the engine's speed to the operator's command and predicted load to deliver even greater fuel economy.
Move more for less
We are always improving our performance, with fuel consumption reduced by 20% and efficiency increased by 10% compared to the other brands, we have delivered on that promise.
Electrical controlled Fans
Divided into 3 groups for independent control, our intelligent fans automatically adjust to match the hydraulic oil and coolant temperature, and the requirements of the air conditioning condenser. The results are impressive.
Product Parameters
Technical Specifications
952EHD
| Operating Weight |
49,500 kg |
| Rated Power |
280 kw@ 2,000 rpm |
| Stadard Bucket Capacity |
3.2 m³ |
| Travel Speed (Hight/Low) |
5.3/3.1 km/h |
| Swing Speed |
8.5 r/min |
| Bucket Digging Force(ISO) |
290/310 kN |
| Arm Digging Force(ISO) |
268/287 kN |
| Shipping Length |
11,515 mm |
| Shipping Width |
3,340 mm |
| Shipping Height |
3,810 mm |
| Shoe Width |
600 mm |
| Max. Digging Reach |
10,625 mm |
| Max. Digging Reach on Ground |
10,388 mm |
| Max. Digging Depth |
6,521 mm |
| Max. Vertical Wall Digging Depth |
5,204 mm |
| Max. Cutting Height |
9,977 mm |
| Max. Dumping Height |
7,038 mm |
| Min. Front Swing Radius |
4,645 mm |
| Engine |
Cummins QSM11 |
| Emission Regulation |
Stage IIIA/CN III |
| Main Pumps Total Flow |
2×380 L/min |
| Relief Pressure, main |
34.3 MPa |
952F
| Operating weight |
51000 kg |
| Engine power |
298 kW @ 2000 rpm |
| Bucket capacity |
2.6-3.2 m³ |
| Travel speed(High) |
5.4 km/h |
| Maximum swing speed |
8.5 rpm |
| Arm breakout force |
265 kN |
| Bucket breakout force. |
280 kN |
| Shipping length |
11960 mm |
| Shipping height |
3735 mm |
| Boom |
6500 mm |
| Arm |
2550 mm |
| Digging reach |
10860 mm |
| Digging reach on ground |
10620 mm |
| Digging depth |
6760 mm |
| Vertical wall digging depth |
5080 mm |
| Cutting height |
9965 mm |
| Dumping height |
6915 mm |
| Minimum front swing radius |
4775 mm |
| Model |
Cummins X12 |
| Emission |
EPA Tier 4F/ EU Stage V |
| System maximum flow |
760 L/min |
| System pressure |
34.3 MPa |
965EHD
| Operating Weight |
60000 kg |
| Power |
331kW |
| Bucket Capacity (Standard) |
4.1 m³ |
| Engine Model |
Scania DC13 |
| Emission Standard |
CN III |
| Configuration |
6-cylinder inline, turbocharged, air-to-air intercooler, electronically controlled direct injection |
| Rated Power (at Rated Speed) |
331kW |
| Max. Torque (Torque/Speed) |
2,007 N.m @1,600 rpm |
| Cooling System |
Water-cooled |
| Swing Speed |
8.7 rpm |
| Gradeability |
35 ° |
| Ground Pressure |
95.3 kPa |
| Max. Digging Force - Stick (ISO) |
300/285/285 kN |
| Max. Digging Force - Bucket (ISO) |
345/345/345 kN |
| Shipping length |
11870 mm |
| Shipping width |
3340 mm |
| Shipping height |
3385 mm |
| Track shoe width (std) |
600 mm |
| Boom |
6500 mm |
| Arm |
2550 mm |
| Digging reach |
11020 mm |
| Digging reach on ground |
10780 mm |
| Digging depth |
6830 mm |
| Vertical wall digging depth |
4360 mm |
| Cutting height |
10190 mm |
| Dumping height |
6840 mm |
| Minimum front swing radius |
4880 mm |
| System maximum flow |
2x448 L/min (2x118 gal/min) |
| System pressure |
35 MPa |
970F
| Operating Weight |
70,500 kg |
| Engine Power |
391 kW (532hp) @ 1,800 rpm |
| Std. Bucket capacity |
4.3 m³ |
| Travel speed(High) |
4.4 km/h |
| Travel speed(Low) |
2.7 km/h |
| Maximum swing speed |
6.8 r/min |
| Arm breakout force |
319 kN |
| Arm breakout force Power boost |
347 kN |
| Bucket breakout force |
360 kN |
| Bucket breakout force Power boost |
393 kN |
| Shipping length |
12,230 mm |
| Shipping width |
4,260 mm |
| Shipping height |
4,710 mm |
| Track shoe width (std) |
650 mm |
| Boom |
6,600 mm |
| Arm |
2,900 mm |
| Digging reach |
11,450 mm |
| Digging reach on ground |
11,170 mm |
| Digging depth |
7,180 mm |
| Vertical wall digging depth |
4,070 mm |
| Cutting height |
10,950 mm |
| Dumping height |
7,030 mm |
| Minimum front swing radius |
4,900 mm |
| Model |
Cummins X15 |
| Emission |
CN III / Stage IIIA |
| System maximum flow |
2×450 L/min |
| System pressure |
34.3 MPa |
975EHD
| Operating Weight |
75000 kg |
| Standard Bucket Capacity |
5 m³ |
| Engine Model |
Cummins X15 |
| Emission Standard |
Stage III |
| Configuration |
6-cylinder inline, turbocharged, air-to-air aftercooled, electronically controlled direct injection, common rail |
| Rated Power (at Rated Speed) |
391 kW @ 1800 rpm |
| Net Power (at Rated Speed) |
375 kW @ 1800 rpm |
| Maximum Torque |
2373 N·m @ 1400 rpm |
| Cooling System |
Water-cooled |
| Travel Speed High/Low |
4.7/3.0 km/h |
| Swing Speed |
7.4 rpm |
| Gradeability |
35 ° |
| Ground Pressure |
108 kPa |
| Max. Digging Force - Arm (ISO) |
349/372 kN |
| Max. Digging Force - Bucket (ISO) |
397/425 kN |
| Length (Transport Position) |
12630 mm |
| Overall Width (Standard Track) |
4260 mm |
| Height (Transport Position) |
4710 mm |
| Minimum Ground Clearance |
867 mm |
| Undercarriage Track Length |
4750 mm |
| Undercarriage Track Gauge |
3350 /3190/ 2710 (Variable Gauge) mm |
| Track Width (Standard) |
650 mm |
| Max. Digging Height |
10950 mm |
| Max. Digging Radius |
11450 mm |
| Max. Digging Depth |
7180 mm |
| Max. Dumping Height |
7030 mm |
990FHD
| Operating Weight |
95,000 kg |
| Rated Power |
447.5 kW (600 hp) @ 2,100 rpm |
| Std. Bucket capacity |
6.2 m³ |
| Travel speed(High) |
4.2 km/h |
| Travel speed(Low) |
2.6 km/h |
| Maximum swing speed |
6.4 rpm |
| Arm Digging Force (ISO) |
391 kN |
| Arm Digging Force Power Boost |
413 kN |
| Bucket Digging Force (ISO) |
471 kN |
| Bucket Digging Force Power Boost |
496 kN |
| Shipping Length |
13,887 mm |
| Shipping Width |
4,500 mm |
| Shipping Height |
5,228 mm |
| Track shoe width (std) |
650 mm |
| Boom |
7,250 mm |
| Arm |
2,925 mm |
| Max. Digging Reach |
12,488 mm |
| Max. Digging Reach on Ground |
12,172 mm |
| Max. Digging Depth |
7,185 mm |
| Max. Vertical Wall Digging Depth |
5,395 mm |
| Max. Cutting Height |
12,342 mm |
| Max. Dumping Height |
7,979 mm |
| Min. Front Swing Radius |
5,415 mm |
| Model |
Perkins 2806 IIIN |
| Emission Regulation |
Tier 3 / Stage IIIA |
| Main Pump Total Flow |
2 × 504 L/min |
| Relief Pressure, main |
35 MPa |
Our Advantages
If you need attachments or other machines or machines with other brands, We could supply them at your one stop, or selecting best products combination for your projects, at prices a little lower prices while keeping same after sales services all over the world.
Besiders, frontless Excavators with rock ribber, Surface DTH drill rigs, Top hammer drill rigs , underground jumbos, development drill rigs, production drill rigs, bolters, scalers, LHD , dump trucks, tunneling jumbos and bulldozers also could be supplied with matched excavators.
Any more question, please feel free to contact us.
){kind=link}