| Customization: | Available |
|---|---|
| Bit Type: | Diamond Bit |
| Drill Hole Diameter: | <100mm |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Quick Facts
Technical Specifications
| Drilling system |
| COP 1638HD+ |
| COP 1838HD+ |
| COP 2238HD+ |
| COP 3038* |
| COP MD20 |
| Hole blowing kit |
| Water mist flushing, external water and air supply** |
| Water mist flushing, external water, internal air supply** |
| Rock drill lubrication warning kit |
| Lubrication air filtration system |
| * Requires RCS and may require a larger electrical motor |
| ** Not in combination with COP 3038 |
| Boom |
| BUT 36 S T |
| BUT 29 HD |
| Automatic boom lubrication for positioning unit |
| Service platform P2* |
| * When equipped with BUT 29 HD |
| Feed |
| BMH 6000-series 12 ft, 14 ft, 16 ft, 18 ft |
| BMH 2000-series 12 ft, 14 ft, 16 ft** |
| Telescopic feed BMHT 6000-series (max 18 ft) |
| Telescopic feed BMHT 2000-series (max 14 ft)** |
| Extension drilling set BSH 110 (BMH feeds only) |
| Rod Adding System, RAS (BMH feeds only)* |
| Water spraying kit on cradle |
| * Not in combination with COP 3038, Max 14 ft feed |
| ** Only in combination with BUT 29 HD |
| Air/watersystem |
| Hydraulically driven screw compressor Atlas Copco GAR 5 |
| Hydraulically driven screw compressor Atlas Copco GAR 30* |
| Hydraulic water booster pump, max capacity at 15 bar boost 200 l/min. |
| Minimum water inlet, 2 bar at 200 l/min** |
| Hydraulic water booster pump, max capacity at 30 bar boost 400 l/min. |
| Minimum water inlet, 2 bar at 400 l/min** |
| Water hose reel |
| Water hose (Ø1.5 inch 70 m) |
| * Might require a larger electrical motor |
| ** Depending on selected rock drill |
| Hydraulic system |
| Low oil level indicator |
| Oil temperature gauge on oil tank, electronically supervised |
| Filtration 16 μm |
| Oil filter indicator |
| Extra filtration package for water and fine particle removal |
| Mineral hydraulic oil |
| Biodegradable hydraulic oil |
| Electrical oil filling pump |
| Heater kit for hydraulic oil tank, diesel engine and electric motors |
| Ni-Cr plated piston rods (limitations exist) |
| Control system |
| Direct Control System 2 (DCS 2) |
| Feed Angle Measurement, FAM 1 |
| Feed Angle Measurement with digital drill plans, FAM 3 |
| Measure While Drilling (MWD) |
| Two operator panels (for standing operation only) |
| Total station navigation |
| Drill Stop Protection system |
| Electrical system |
| Total installed power 83 kW, Main motors, Sf 1.15 75 kW |
| Total installed power 158 kW, Main motors, Sf 1.15 2x75 kW |
| Total installed power 198 kW, Main motors, Sf 1.3 2x95 kW** |
| Voltage 380-1 000 V 50/60 Hz |
| Voltage 690-1 000 V 50/60 Hz** |
| Starting method, star/delta (400-690 V) |
| Starting method, direct start (1 000 V) |
| Starting method soft start (not for 1 000 V) |
| Transformer 8 kVA |
| Electronic overload protection for electric motors |
| Digital voltmeter/amperage meter in electric cabinet |
| Percussion hour meter on operator display |
| Phase sequence and eart fault indicator |
| Cable reel, diameter 1 600 mm |
| Electric outlet for accessories, 16 A (CE)/32 A (CE) (380-690 V) |
| Extra transformer 3-phase, 15 kVA (230/400 V outlet) (690-1 000 V) |
| PC4 or PC5 plug |
| Battery charger |
| Dual controls for cable reel |
| Stainless steel electrical enclosure |
| Electric system 24 V |
| 24 V Batteries 2x125 Ah |
| Tramming lights 8x22 W LED |
| Working lights 4x150 W, 24 V DC |
| Illuminated stairs LED |
| * Depending on selected rock drill |
| ** When equipped with COP 3038 |
| Carrier |
| Deutz TcD 2013 Lo4, Stage lllA/Tier 3, 120 kw |
| Deutz TCD 4.1 LO4, Stage w/Tier 4F, 115 kw |
| Deutz TCD 6.1 LO6, CN4, 129 k |
| Articulated steering t41' steering angle' |
| Four-wheel drive |
| Hose/cable guiding at water/cable reelDana 113 (short) axle |
| Automatic differential lock on axles, limited slipTires 12.00xR24 |
| Clearance outside axles 13" rear, 22" frontFuel tank, volume 110 l |
| Central lubrication system |
| Fire suppression system ANSUL (Manual, checkfire or automatic)Fire suppression system FORREX (Automatic} |
| Rig washing kit |
| Manual lubrication kit |
| Boot washing kit |
| Hydraulic Swellex pump type Hi for manual installation |
| Hydraulic outlet for charging with Mini SSE |
| Cabin (optional) |
| ROPS and FOpS certified cabin, noise level <80 dBLA) |
| Mounting height -140/-250 mm |
| Lowr profile cabin -150mm |
| Air conditioning unit |
| Heating function for air conditioning (water transferred) |
| 12 V outlet for communication radio |
| Electrical heater, 1.2 kw, 230 V(CE) |
| Reversing camera with monitor |
| Fixed seat |
| Swingable seat for drilling and tramming |
| Cabin body made of stainless steel |
| Media player |
| Dimensions |
| width 2 245 mm |
| Height with cabin 3 179 mm |
| Height roof upv'down 3 019/2 324 mm |
| Length with BMH 6814 feed(s) (Ltot)14 297 mm |
| Length with BMH 2843/BMH 2743 feed(s)(Ltot)13 913 mm |
| Ground clearence 260 mm |
| Turning radius outer/inner 7 200/4 400 mm |
Underground mining machines, one stop supplying.
1. Rock bolting rigs / Rock support drill rigs
2, production jumbo
3, Scalers
4, low profile jumbo drill rigs
5, Autonomous Development Jumbo Drill Rigs
6, LHD and Dump Trucks
7, BullDozer
8, Surface operation
Excavators
..........................................
Any more machine purchasing, please feel free to contact us.
){kind=link}