| After-sales Service: | Engineers at Spots All Over The World |
|---|---|
| Warranty: | 1 Y After Operating or 12+1.5 M After Delivery |
| Certification: | CE, RoHS, ISO 9001:2000, ISO 9001:2008 |
|
Still deciding? Get samples of US$ 330000/Piece
Request Sample
|
Suppliers with verified business licenses
Split Mountain KM312 is a rock reinforcement drill rig that installs all most common rock bolt types in combination with a screen handling arm for installation of steel wire meshes when required. Provided with a strong and reliable boom K28F, it can install from one carrier setup, several rows of rock bolts,from 1.5 m to 3 meters long. The extremely short but powerful Montabert HC50 rock drill delivers the best ratio between the rock bolt length and drift height. The rock bolting process is completely mechanized and controlled by a single operator from under a ROPS/FOPS safety cabin or FOPS safety canopy. As all the Split Mountain drill rigs based on the sturdy carrier family, the Split Mountain KM312 is designed for safety,reliablity while easy maintenance, most of the daily and routine checks are done with both feet on the ground..
Features
» Designed for roof reinforcement in underground mines with small and medium cross sections as small as to 2.5*4 m(W*H)
» Easy to Drill and Bolt Vertical,inclined 3m depth Bolting holes at 5m height roof
» Install several rows of 1.5-3-meter (5-10ft) rockbolts from a single set-up
» Length of bolts 5',6',7',8'and 10'
» Well-proven bolting head with reliable parts
» The rock bolting process is completely mechanized and controlled by a single operator from under a ROPS/FOPS safety cabin or FOPS safety canopy
» Produtivity up to 7800 bolts/month
Technical Specifications
| Hydraulic Drifter/Rock Drill | Control System | |||
| Type | HC50(Drilling) | HC50(Bolting) | Anti-jamming control | Yes |
| Percussion power | 13kW | Rotation control | Adjustable/Reversible | |
| Percussion pressure | Max. 150 bar | Flushing control | Water flow and pressure | |
| Percussion rate | 62Hz | Percussion control | Adjustable power | |
| Rotation torque | 330 Nm | Voltage | 24V | |
| Hole size (bolting) | ∅32 - 51 mm | Carrier | ||
| Shank adapter | 45 mm / R32 male | Type of carrier | Frame-steered | |
| Bolting Head | Carrier articulation | ± 35° | ||
| Bolt carousel capacity | 10 rock bolts with 200 x 200 mm Max. plate size | Rear axle oscillation | ± 10° | |
| Deutz engine BF4L914 | 73 kW,air cooled Tier 3 | |||
| Bolt head length | Max. 4150 mm | Transmission Hydrodynamic | DT12000 | |
| Bolting Boom | Front / Rear Axles | DANA 123 | ||
| Boom extension | 1200 mm | Tires | 12.00-20 | |
| Roll-over angle | 360° Rotaty Actuator | Service brakes | Hydraulic wet disc | |
| Hydraulic System | Parking and emergency brakes | SAHR fail safewet disc | ||
| Powerpack | 1 x 55 kW | Tramming speed | Max.16 km/h | |
| Percussion pump | 100 cc (variable) | Gradeability / sideways tilt | Max. 15° / 5° | |
| Rotation pump | 45 cc (gear) | Ground clearance | 320 mm | |
| Filtration | 10 µ | Centralized greasing points | 10 ports | |
| Oil tank volume | 200 liters | Air And Water System | ||
| Cooler for hydraulic oil | Oil-to-water 1 x 30 kW | Flushing | By water | |
| Electric System | Water pump capacity | 50 l/min | ||
| Standard voltages | 380 - 690 V (± 10%), 50 or 60 Hz | Rock drill oil consumption | 100 - 200 g/h | |
| Total installed power | 70 kW | Rock drill air consumption | 150 - 250 l/min | |
| Batteries(Chargeable) | 2 x 12 V, 80 Ah | Air compressor | 1 m³/min (7 bar) | |
| Cable Reel | 80m-100m | Overall with bolts 1.5m,others depending on options. | ||
| Cable reel lubrication | Manual | Weight | 12900 kg | |
| Cable reel mud clean | Manual | Transport / bolting length | 10500 mm / 9650 mm | |
| Front lights | 6 x 50W LED (4200 lm, 6000 K) | Tramming / bolting width | 1800 mm / 3100 mm | |
| Rear lights | 4 x 50W LED (4200 lm, 6000 K) | Tramming / bolting height | 2000 mm / 3300 mm | |
| Percussion hour meters | Optional | Turning width(T-section) | 3000 mm | |
| Operator remote control | Optional | Turning radius(Inner/Outter) | R3280 / R6000 mm | |
1, Development dirll rig with automation drill rigs supplying2, Production drill rigs / Top hammer long hole / longhole drill rigs
3, Tunneling or mining jumbos4, Scalers5, LHDs
6, Dump trucks
If ores on surface, below matched machines also could be supplied,
Any more question, please feel free to contact us.
){kind=link}