Customization: | Available |
---|---|
After-sales Service: | Engineers at Spots All Over The World |
Warranty: | 1 Y After Operating or 12+1.5 M After Delivery |
Still deciding? Get samples of US$ 48000/Set
Request Sample
|
Suppliers with verified business licenses
One-stop dry farming produciton solution provider
Illustration of whole process mechanization operation
All indexes and performances meet the European technical standards
Tractors
Technical Data of Tractors (suggested )
Type |
Unit |
RS1604 |
Overall dimension (L × W×H) |
mm |
5200×2435×3250 |
Wheelbase |
mm |
2640 |
Minimum mass during operation |
kg |
5810 |
Minimum ground clearance |
mm |
450 |
Engine emission |
/ |
National Emission Standard III |
Rated power |
kW |
117.6 |
Cluth type |
/ |
Double acting |
Number of gears of the gearbox |
/ |
16F+8R |
Brake type |
/ |
Wet and disc |
Tyre size (front wheel / rear wheel) |
/ |
14.9-26/18.4-38 |
Type of hydraulic lifting system |
/ |
Split type |
Maximum lifting capacity |
kN |
35 |
Tillage control method |
/ |
Position control, floating control, electronic lift control system is optional |
Hydraulic output multiway valve |
/ |
2 sets of hydraulic output, and 3 sets of hydraulic output is optional |
Maximum flow rate of hydraulic output |
L/min |
70 |
Hydraulic hitch |
/ |
Three-point rear suspension, Type III |
Rated traction |
kN |
51 |
Power output speed |
r/min |
540/1000 |
Safety shelf or cab |
/ |
Air - conditioned cab |
Technical Data of Tractors of Baler (suggested )
Type |
Unit |
9YF-2200S |
Overall dimensions (Length × width × height) |
mm |
5710×2670×1750 |
Total weight |
kg |
2850 |
Bale section (width × height) |
mm |
460×360 |
Bale length |
mm |
350~1200 |
Piston frequency |
t/min |
100 |
Pickup width |
mm |
2200 |
Number of cutter shaft |
/ |
2 double-screw cutter shaft |
Number of hammer claw / flail knife |
/ |
22 hammer claws/ 63, 84 flail knives |
Cutter shaft speed |
rpm |
2250 |
Feeder rake |
/ |
4-fork feeding mechanism |
Overload protection |
/ |
Shear bolt |
Cording box capacity |
/ |
6 rolls |
Cord type |
/ |
Plastic rope / Nylon rope |
Knot-tying mechanism protection |
/ |
Shear bolt |
Matched power |
kw/hp |
60~70kw/ (80~95hp) |
Drive shaft speed |
r/min |
540 |
Technical Data of Wheeled grain combine harvester (suggested )
Model | Unit | TF120(4YZL-8F) |
Engine | kW | 191(260hp) |
Feed quantity | kg/s | 12(wheat) |
Operation Productivity | hm²/h | 0.41-1.95 |
Adapter header | / | 8×650mm/8×500mm row spacing; 5.4m Rigid table, flexible table |
Type of thresher device | / | Accelerated feed roll+double longitudinal flow |
Type of concave screen | / | Grid + round steel |
Screening area | m² | 4.3 |
Machine wall width (cleaning, bridge crossing) | mm | 1300 |
Type of clutch | / | Electro-hydraulic |
Grain tank | m³ | 7 |
Maximum unloading height | m | 5 |
Walking chassis | / | 1000 series axle, 4 gear + hydraulic front and rear drive |
Wheelbase | mm | 3578 |
Drive wheelbase | mm | 2900 |
Guide wheelbase | mm | 2600 |
Straw chopper | / | Knife throwing |
Fuel tank capacity | L | 400 |
Overall dimension(L*W*H) | mm | 9800×3850×3900 |
Weight(With header, without chopper) | kg | 12700 |
Low temperature cross flow circulation grain rice corn wheat dryer
Model |
Unit |
DC100 |
|
Machine |
Overall dimension(L*W*H) |
mm |
3577×2973×9315 |
Weight |
kg |
2840 |
|
Dryer type |
/ |
Batch Type Circulating Dryer |
|
Power supply |
V/Hz |
Three-phase:220V/60HZ 380V/50HZ |
|
Total power |
kW |
9.44 |
|
Capacity |
Rice |
kg |
2500-10000 |
Wheat |
kg |
3035-12100 |
|
Performance |
Feeding time needed (Rice/Wheat) |
min |
40-50/35-45 |
Discharging time needed (Rice/Wheat) |
min |
50-60/45-55 |
|
Hot air temperature |
°C |
30-120 |
|
Drying ability |
t*%/h |
Rice≥6 / Wheat≥7 |
|
Hourly drying rate |
%/h |
0.5-1.2 |
|
Safety device |
/ |
alarm (fault and temperature), automatic shutdown, temperature controlling device, electrical overload protection, power leakage protection device |