| Bit Type: | Diamond Bit |
|---|---|
| Drill Hole Diameter: | <100mm |
| Drilling Depth: | <10m |
|
Still deciding? Get samples of US$ 220000/Set
Request Sample
|
Suppliers with verified business licenses
Split Mountain KJ310,is a track mounted,electro-hydraulic mining development drill rig,designed for inclined drifts drilling on slope with gradeability near 25 degrees. With fast and accurate drilling, this mining drill rig lowers waste development costs and minimizes dilution while offering a safe and ergonomic workplace for both operators and service personnel. Combination of efficient rock drill, robust boom and advanced controls, the mining drill rig will meet even the most challenging requirements.
Quick Facts
» Drifter / rock drill: HC109 18.8 kW,
» Feed 360-degree rollover and ±135° Swing,ideal for cross cutting and bolting,
» Hole diameter: 45-88 mm with HC109 Rock Drill/Drifter,
» Coverage: 12-35 m2,
» Engine power: 60kw/2200rpm Cummins,
» Motor power:55 kw ABB.
Features
- Robust universal,Heavy duty boom with a large optimum shaped coverage,
- Full automatic parallelism for direct,fast,easy accurate positioning,face drilling,cross cutting and bolting,
- High performance with reliable hydraulic control system,ergonomically designed operator environment,good visibility and hand reach servicability on the panel,
- Powerful engine,low oil consumption,
- ROPS and FOPS approved canopy or cabin.
Technical Specifications
| Hydraulic Drifter/Rock Drill | Control System | ||
| Type | HC109 | Anti-jamming control | Yes |
| Percussion power | 18.8kW | Rotation control | Adjustable/Reversible |
| Percussion pressure | Max. 135 bar | Flushing control | Water flow and pressure |
| Percussion rate | 47Hz | Percussion control | Adjustable power |
| Rotation torque | 780 Nm | Voltage | 24V |
| Hole size (bolting) | ∅42-102 mm | Carrier | |
| Shank adapter | T45 / R38 male | Type of carrier | Track / Crawler |
| Boom | Tracks | triple grouser, sealed and lubricated | |
| Parallel holding | Complete | Width | 305 mm / 12 in |
| Lifting angle | Up55°,down 16° | Cummins engine QSB-C80-31 | 60 kW,Tier 3 |
| Swing | left 35°,right 35° | Transmission | Double-speed motor |
| Extension | 1600 mm | Tramming speed | Max.2.5 km/h |
| Feed extension | 1200 mm | High gear | Max.2.5 km/h |
| Feed roll-over angle | 360° Rotaty Actuator | Low gear | 1.2 km/h |
| Hydraulic System | Hydraulic jacks, front | 2 extendable | |
| Powerpack | 1 x 55 kW | Oscillation angles | +/- 10° |
| Percussion pump | 100 cc (variable) | Gradeability / sideways tilt | Max. 25° / 5° |
| Rotation pump | 55 cc (gear) | Ground clearance | 180 mm |
| Filtration | 10 µ | Centralized greasing points | 8 ports |
| Oil tank volume | 200 liters | Air And Water System | |
| Cooler for hydraulic oil | Oil-to-water 1 x 30 kW | Flushing | By water |
| Electric System | Water pump capacity | 50 l/min | |
| Standard voltages | 380 - 690 V (± 10%), 50 or 60 Hz | Rock drill oil consumption | 180 - 250 g/h |
| Total installed power | 70 kW | Rock drill air consumption | 300 l/min |
| Batteries(Chargeable) | 2 x 12 V, 80 Ah | Air compressor | 0.5 m³/min (7 bar) |
| Cable Reel | 80m-100m | Overall with rods 3m,others depending on options. | |
| Cable reel lubrication | Manual | Weight | 12000 kg |
| Cable reel mud clean | Manual | Transport length | 10700 mm |
| Front lights | 6 x 50W LED (4200 lm, 6000 K) | Tramming / drilling width | 1650 mm / 2300 mm |
| Rear lights | 4 x 50W LED (4200 lm, 6000 K) | Tramming / drilling height | 1880 mm / 2480 mm |
| Percussion hour meters | Optional | Turning width(T-section) | 2800 mm |
| Operator remote control | Optional | Turning radius(Inner/Outter) | R3263 / R5400 mm |
Underground mining machines, one stop supplying.
1. Rock bolting rigs / Rock support drill rigs
2, production jumbo
3, Scalers
4, low profile jumbo drill rigs
5, Tunneling Jumbos
6, LHD and Dump Trucks
7, BullDozer
8, Surface operation
Excavators
..........................................
Any more machine purchasing, please feel free to contact us.
){kind=link}