Production Top Hammer Longhole Long-Hole Drill Rig Ks313 Horseshoe Mounted Drill Unit for Small Medium-Sized Drift Hole Range of 64 to 115 mm Parallel Holes 42m

• Customization: Available
• After-sales Service: Engineers at Spots All Over The World
• Warranty: 1 Y After Operating or 12+1.5 M After Delivery
• Model NO.: KS313
• Certification: CE, RoHS, ISO 9001:2000, ISO 9001:2008
• Condition: New
• Motor: AC Motor
• Drill Hole Diameter: 100-150mm
• Drill Hole Depth: <100m
• Bit Type: Diamond Bit
• Drilling Way: Compound
• Transport Package: Container
• Specification: 10350x2180x2890 mm
• Trademark: SMME
• Origin: China
• HS Code: 84306919
• Production Capacity: 5000 Sets /Month

Product Description

Production top hammer Longhole long-hole drill rig KS313 horseshoe mounted drill unit for small medium-sized drift hole range of 64 to 115 mm parallel holes 42m
 

Product Description

Features,

The robust KS313 is a Top hammer long-hole production drill rig designed for small to medium-drift mining. It accommodates a range of drill bits and rock drills to adapt to your specific needs. KS313 has the capability to drill parallel holes with 1.5 meter spacing in the side walls, and drilling up and down. The rig operator enjoys excellent visibility and enhanced safety in the comfortable ROPS and FOPS certified cabin. 

Main benefits
Safe productivity and Live Work Elimination (LWE) with electrical control systems that enables a higher degree of autonomous operations.
Improved effectiveness thanks to a wide range of automation software, the new carousel design, and improved rock drill control.
Excellent drilling quality with consumables such as the T-series tube drilling system,which creates a balanced setup to mitigate in-hole-deviation.

The 360° drilling module rotation and wide boom swing and tilt angles make the unit suitable for most mining methods and various service support applications. The drilling control system with the user-friendly operating interface and various instrumentation and automation levels allow maximum productivity and good drilling accuracy. The layout of the carrier is designed for good visibility and stability, ensuring safe tramming in narrow mine drifts. All service points are accessible from ground level
 

Product Parameters

Technical Specifications( Against HC112 drifter)

Hydraulic Drifter/Rock Drill			Control System
Type	HC112		Anti-jamming control	Yes
Percussion power	26-30kW		Rotation control	Adjustable/Reversible
Percussion pressure	Max. 210 bar		Flushing control	Water flow and pressure
Percussion rate	Max. 46Hz		Percussion control	Adjustable power
Rotation torque	Max. 1680Nm		Voltage	24V
Hole size	∅76 mm	∅89 -127 mm	Carrier
Shank adapter	T45 M	T51 M,T60 M	Type of carrier	Frame-steered
Drill unit			Carrier articulation	± 40°
Rod carousel capacity	24 pcs		Rear axle oscillation	± 10°
Feed /Pull Force	31 kN		Engine - Cummins	93 kW,QSB3.9- C125
Feed extension	1200 mm		Transmission Hydrodynamic	DT20000
Feed dump	+20 Degrees forward		Front / Rear Axles	DANA 123 / 112
Feed drilling	-65 Degrees backward		Tires	12.00-20
Drill Rod	4'-6' Rods		Service brakes	Hydraulic wet disc
Hydraulic System			Parking and emergency brakes	SAHR fail safewet disc
Powerpack	1 x 90 kW		Tramming speed	Max.16 km/h
Oil tank filling pump	Electric		Gradeability / sideways tilt	Max. 15° / 5°
Low oil level indication	Low oil level switch		Ground clearance	320 mm
Filtration	20 µ/10 µ		Centralized greasing points	10 ports
Oil tank volume	270 liters		Air And Water System
Cooler for hydraulic oil	Oil-to-water 1 x 45 kW		Flushing	By water
Electric System			Water pump capacity	375 l/min
Standard voltages	380 - 690 V (± 10%), 50 or 60 Hz		Rock drill oil consumption	180 - 250 g/h
Total installed power	119 kW		Rock drill air consumption	300 l/min
Batteries(Chargeable)	2 x 12 V, 80 Ah		Air compressor	1 m³/min (7 bar)
Cable Reel	80m-100m		Overall with rods 1525mm,others depending on options.
Cable reel lubrication	Manual		Weight	22000 kg
Cable reel mud clean	Manual		Transport / bolting length	9669 mm / 8500 mm
Front lights	6 x 50W LED (4200 lm, 6000 K)		Tramming / bolting width	2200 mm / 3300 mm
Rear lights	4 x 50W LED (4200 lm, 6000 K)		Tramming / drilling height	3253 mm / 3591 mm
Percussion hour meters	Optional		Turning width(T-section)	3400 mm
Operator remote control	Optional		Turning radius(Inner/Outter)	R2890 / R5440 mm

 

Our Advantages

Genuine products with those in factories, while lower prices than them. Whole preparation and underground mining machines could be supplied at one stop, 

Below illustration of some machines.

 

FAQ

All of Machines will be maintenaned or repaired by dealers in your application spot.

All of machines ,spare parts, etc., 100% same as those in factories. 

Accepting authorities parts to inspect products and manufacturing process.